Moving the printer head

[michelle]

Anyone out there with information on how to adjust the setting for controlling what area of the media to print on so I'm not wasting media. We have a mutoh falcon outdoor and are using onyx 6.5.

[Scott]

I have no clue what the differences between a Falcon Outdoor & Falcon II Outdoor are, but I found a user guide for the Falcon II that covers what you're talking about. Hopefully this helps, if not there are other uses here who have or had that same printer so they may be able to help further.

Please see the attached PDF: origin_setup_menu.pdf

[jonkovach]

Can you do an area based print start, on the conserve media or group jobs together setting on the RIP? That way, you can say, don't start printing until media width is 90% full, at least, as opposed to starting after 5 minutes....
Jon